Star Micronics BCR-POP1 Scanner Setup

These guides cover talech Register and related POS equipment. Paytura is your merchant services partner; talech provides the register software and device support referenced in these articles.

This article will guide you through the setup of the Star Micronics BCR-POP1 Scanner for use with the talech Register. 

Table of Contents 

• Connect to talech Register
• Troubleshooting
  • Reset the scanner
  • Scanner not recognized by talech Register

Connect to talech Register  

1. Assemble the stand for the barcode scanner and place the scanner in the stand. 
2. Connect the barcode USB cable into one of the USB ports on the talech Register. 

3. Scan the following barcodes in succession to place the scanner in Keyboard Mode (required if you are plugging directly into talech Register).

Note: Turn your screen brightness up before attempting to scan the barcodes.

Back to top

Troubleshooting

Reset the scanner 

To reset the scanner back to factory defaults, scan the following barcodes in succession.  

Note: Turn your screen brightness up before attempting to scan the barcodes. 

Back to top

Scanner not recognized by talech Register 

If you are having issues with the barcode scanner being recognized by talech Register, try these steps. 

1. From the sign in screen, select the Log Out button to log completely out of your store account on the talech Register app. 

2. Select LOG OUT on the pop-up box that appears. 

3. Log back in with your Admin credentials (email and password). 

Back to top

Need more help?

• talech training & device support (24/7): 1-888-995-1998
• Paytura merchant support (24/5): 1-855-4-PAYTURA or contact Paytura