These guides cover talech Register and related POS equipment. Paytura is your merchant services partner; talech provides the register software and device support referenced in these articles.
The Ingenico Link 2500 card reader uses a Bluetooth connection.
| Note: The Link 2500 V1 is a supported device, however, if an issue arises and the device is determined to be faulty after exhausting all troubleshooting steps, a direct exchange for the same device is not available. Instead, an exchange must be made for a Link 2500 V2 device. |
Pairing your Link 2500
- Ensure your Link2500 is fully charged. Press and hold the Green button to power on the device.
- Quickly enter 0001 on the keypad and select 3-Bluetooth Parameters > 2-Phone Pairing to put the Link/2500 in pairing mode.
| Note: The access code varies based on device version. If this is unsuccessful, enter 0003. The Link2500 screen should then display BT pairing required. |
- Navigate to the iPad Settings and select Bluetooth.
- One of the options should begin with LK2500. Tap on this. You may be presented with a Bluetooth pairing request. Select Pair. You may also be asked to confirm the pairing on the Link 2500 device.
- If this is done correctly, you should see the LK2500 device paired, as illustrated below:
- Log into the talech app and navigate to Back Office > Settings > Card reader. Select Link 2500 as your card reader and test a transaction for $0.01.
| Important! If the Link2500 option does not appear under the list of Card Readers, this could mean you have an account change processing. Please contact talech Support for assistance if this occurs. |
Need more help?
- talech training & device support (24/7): 1-888-995-1998
- Paytura merchant support (24/5): 1-855-4-PAYTURA or contact Paytura